Table Saw Fences

• Quick release riving knife greatly reduces binding/kickback risk
• Built-in retractable caster system (patent pending) for immediate shop mobility
• Push button arbor lock (patent pending) for rapid blade change
• Poly-V drive belt system delivers efficient, quiet operation
• Wide stance heavy-duty trunnion for stability and smooth blade positioning

Product Description
Arbor Diameter (in.) 5/8 Arbor Speed (RPM) 4300 Blade Diameter (in.) 10 Brand Powermatic Distance Between Sliding Table and Blade (in.) n.a. Dust Collection Adapter Port n.a. Dust Collection Minimum CFM Required 350 Dust Port Diameter (OD/in.) 4 Height 39 inch Leg Stand with Steel Storage n.a. Length 85 inch Maximum Cross Cut (in.) n.a. Maximum Depth of Cut (in.) 3-1/8 Maximum Depth of Cut at 45 Degrees (in.) 2-1/8 Maximum Diameter of Dado (in.) 8 Maximum Rip Left of Blade (in.) 13-1/2 Maximum Rip Right of Blade (in.) 50 Maximum Width of Dado (in.) 13/16 Miter Gauge Type Deluxe, micro adjustable with Aluminum extruded fence Model Number PM2000 Motor HP 5HP Motor Phase 3Ph Motor Voltage 230/460*V Net Weight 675 pound Overall Dimensions 85 x 37 x 39 Part Number 1792005K Prewired Prewired 230V, *requires additional 460V mag. switch Rapid Wing Extension n.a. Ship Weight 746 pound Table Height (in.) 34-1/2 Table in Front of Saw Blade at Maximum Depth of Cut (in… More >>

Powermatic 1792005K Model PM2000 5 HP 3-Phase Table Saw with 50-Inch Accu-Fence System

• 36″ Heavy duty aluminum extrusion up-grade fence for the Delta Unifence Table Saw Guide System
• Replaces the Stock Delta Fence which mounts to their saw fence guide.
• You must own the Delta UniFence to use this product.
• Simple mounting – slide the stock fence off and slide the Uni-T-Fence on.
• No holes to drill

Product Description
The Uni-T-Fence is a heavy duty aluminum extrusion up-grade fence foe the Delta Uni-fence Table Saw System. The extruded square design allows you to attach or even build many different types of jigs and fixtures. Comes in 36″ and 43″, each sold separately…. More >>

36″ UNI-T-FENCE TABLE SAW FENCE

• Sturdy steel construction
• Powder-coated finish will not rust
• Attatches to mobile base and supports fence
• 1 year warranty

HTC 5066 Mobile Base Extension Table Saw With 30-Inch Fence

• Left-tilting table saw with 50-inch fence; arbor lock; built-in retractable casters; dust collection
• 3-horsepower, 1-ph, 230-volt motor; riving knife with quick release; poly-v belt
• Cast-iron trunnion and extension wings
• Includes saw, fence, left and right wings, arbor wrench, (no blade or power cord)
• 85-by-37-by-34-1/2-inches; 600-pounds; 1-year warranty

Product Description
Arbor Diameter (in.) 5/8 Arbor Speed (RPM) 4300 Blade Diameter (in.) 10 Brand Powermatic Distance Between Sliding Table and Blade (in.) n.a. Dust Collection Adapter Port n.a. Dust Collection Minimum CFM Required 350 Dust Port Diameter (OD/in.) 4 Height 39 inch Leg Stand with Steel Storage n.a. Length 85 inch Maximum Cross Cut (in.) n.a. Maximum Depth of Cut (in.) 3-1/8 Maximum Depth of Cut at 45 Degrees (in.) 2-1/8 Maximum Diameter of Dado (in.) 8 Maximum Rip Left of Blade (in.) 13-1/2 Maximum Rip Right of Blade (in.) 50 Maximum Width of Dado (in.) 13/16 Miter Gauge Type Deluxe, micro adjustable with Aluminum extruded fence Model Number PM2000 Motor Amps 13 Motor HP 3HP Motor Phase 1Ph Motor Voltage 230V Net Weight 675 pound Overall Dimensions 85 x 37 x 39 Part Number 1792000K Prewired n.a. Rapid Wing Extension n.a. Ship Weight 746 pound Table Height (in.) 34-1/2 Table in Front of Saw Blade at Maximum Depth of Cut (in.) 11-1/4 Table Size with Standard Exte… More >>

Powermatic 1792000K Model PM 2000 3 Horsepower Cabinet Saw with 50-Inch Accu-Fence, 2 Cast Iron Extension Wings, Table Board, and Legs, 230-Volt 1 Phase

• Full-size drawings of each of the 11 box joint and 29 dovetail patterns
• 51 templates included for making every equally and variably spaced joint imaginable
• Includes a set of ten “Fixed INCRAment” templates that allow easy repetitive cuts on unusual spacings

Product Description
The complete guide to creating master joinery using any Incra positioner! Includes step-by-step instructions, detailed illustrations, and 51 multi-colored joint-making templates…. More >>

INCRA MLT2 Master Reference Guide with Templates

• 22″ wide, open grid table, 76″ outboard rail allows crosscuts up to 60″ with fence at rear of table. Legs adjustable to 43″ height
• 45″ crosscut fence included, and can be positioned at the front or the rear of the table; crosscuts 20″ in front of the blade with the fence at the front of the table
• heavy stainless steel rails are braced and supported by adjustable legs, allowing you to level the sliding table with the saw table easily
• complete with quick-release bracket, hold-down clamp, two work stops, two table extensions, and panel supports
• legs adjustable to 43″ height.

Exaktor EX26X Table Saw Large Open Grid Sliding System With Guide Rails, Fence, Table Assembly, Extension Bars & Blocks

• The fence clamps securely to front tube and rear rail
• Steel tube fence body glides easily to handle quick and repetitive work along with precision ripping and squaring cuts
• Projected aluminum face attaches to solid-steel angle iron and tubing
• 3-point T square locking system is accurate with 1/64 of an inch
• Added rear hold down support when using jigs and featherboards

Amazon.com Product Description
Easily and accurately attach the Delta T2 Fence System to your table saw. Along with the fence, the 36-T30 includes a steel guide tube with scale, front & rear support rails, and mounting hardware…. More >>

Delta 36-T30 T2 30-Inch Fence and Rail System

• Artisan 10-Inch left-tilt table saw with a powerful 1-1/2-Horsepower motor for smooth operation
• 50-Inch Accu-Fence system is accurate and easy to use
• Precision-ground cast-iron table; 3VX belt drive; T-slot miter gauge with stops
• Includes motor, accu-fence, 4-Inch dust port, left and right extension wings, blade and dado inserts, blade guard and splitter, miter gauge, open stand, power cord
• Weighs 390-Pound shipped; 1-Year warranty

Product Description
A powerful 1-1/2-horsepower motor combined with rugged construction and 50-inch Accu-Fence system make the Artisan 10-inch table saw the premier table saw for the contractor, craftsman, or home hobbyist. Other features include the T-slot miter gauge, which increases accuracy and flexibility in stock width capabilities, and solid cast-iron extension wings, providing ruggedness for increased accuracy and longevity. The unitized wiring system is readily removed for portability. Shown with optional mobile base.Amazon.com Product Description
Rugged and powerful, the Powermatic 64A 10-Inch Contractor’s Table Saw features a left-tilting arbor and is perfect for the contractor, craftsman, or home hobbyist. Designed to meet the highest quality and performance standards in the industry, this heavy-duty machine features a cast-iron tabletop and two wings that are ground to a mirror-like finish for incredible accuracy.The 64A Contractor’s
Table Saw
… More >>