Table Saw Fences

• Quick release riving knife greatly reduces binding/kickback risk
• Built-in retractable caster system (patent pending) for immediate shop mobility
• Push button arbor lock (patent pending) for rapid blade change
• Poly-V drive belt system delivers efficient, quiet operation
• Wide stance heavy-duty trunnion for stability and smooth blade positioning

Product Description
Arbor Diameter (in.) 5/8 Arbor Speed (RPM) 4300 Blade Diameter (in.) 10 Brand Powermatic Distance Between Sliding Table and Blade (in.) n.a. Dust Collection Adapter Port n.a. Dust Collection Minimum CFM Required 350 Dust Port Diameter (OD/in.) 4 Height 39 inch Leg Stand with Steel Storage n.a. Length 85 inch Maximum Cross Cut (in.) n.a. Maximum Depth of Cut (in.) 3-1/8 Maximum Depth of Cut at 45 Degrees (in.) 2-1/8 Maximum Diameter of Dado (in.) 8 Maximum Rip Left of Blade (in.) 13-1/2 Maximum Rip Right of Blade (in.) 50 Maximum Width of Dado (in.) 13/16 Miter Gauge Type Deluxe, micro adjustable with Aluminum extruded fence Model Number PM2000 Motor HP 5HP Motor Phase 3Ph Motor Voltage 230/460*V Net Weight 675 pound Overall Dimensions 85 x 37 x 39 Part Number 1792005K Prewired Prewired 230V, *requires additional 460V mag. switch Rapid Wing Extension n.a. Ship Weight 746 pound Table Height (in.) 34-1/2 Table in Front of Saw Blade at Maximum Depth of Cut (in… More >>

Powermatic 1792005K Model PM2000 5 HP 3-Phase Table Saw with 50-Inch Accu-Fence System

• 22″ wide, open grid table, 76″ outboard rail allows crosscuts up to 60″ with fence at rear of table. Legs adjustable to 43″ height
• 45″ crosscut fence included, and can be positioned at the front or the rear of the table; crosscuts 20″ in front of the blade with the fence at the front of the table
• heavy stainless steel rails are braced and supported by adjustable legs, allowing you to level the sliding table with the saw table easily
• complete with quick-release bracket, hold-down clamp, two work stops, two table extensions, and panel supports
• legs adjustable to 43″ height.

Exaktor EX26X Table Saw Large Open Grid Sliding System With Guide Rails, Fence, Table Assembly, Extension Bars & Blocks

• The fence clamps securely to front tube and rear rail
• Steel tube fence body glides easily to handle quick and repetitive work along with precision ripping and squaring cuts
• Projected aluminum face attaches to solid-steel angle iron and tubing
• 3-point T square locking system is accurate with 1/64 of an inch
• Added rear hold down support when using jigs and featherboards

Amazon.com Product Description
Easily and accurately attach the Delta T2 Fence System to your table saw. Along with the fence, the 36-T30 includes a steel guide tube with scale, front & rear support rails, and mounting hardware…. More >>

Delta 36-T30 T2 30-Inch Fence and Rail System

• Includes 30-inch rail assembly for HTC-900 Multi-Fence
• High-tech molded steel cam and clamping mechanism
• Heavy duty, easy to use micro-adjust, enables you to attach fence accessories and ship built fixtures and jigs
• Exclusive quick change fence faces
• Use with Jet Xacta, Powermatic Accu-Fence, and Biesemeyer Systems

HTC HTC930 Table Saw Commercial Style Multi-Fence System with 30-Inch Rails

• Upgrade an existing INCRA TS Saw System, Ultra Router System, or LS Router System to the versatility of the Wonder Fence
• Independently adjustable infeed and outfeed fence halves
• Included Hi-Rise Fence Support
• Integrated dust collection fittings
• Plans and hardware included for zero-clearance sub fences

INCRA WF/ULTRA Wonder Fence Upgrade for LS or ULTRA Positioner System

• Designed to fit fence systems with a 50-inch cutting capacity to the right of the blade
• Perform non-through cutting operations without needing to be removed
• No mounting bracket behind the blade to interfere with molding operations or dado cutting
• See-through blade guard that allows for any blade angle
• Includes T-arm assembly, blade guard, splitter, installation bracket, and mounting hardware

Amazon.com Product Description
The Biesemeyer 78-960 T-square Table Saw BladeGuard System for 50-inch and 52-inch Fences is compatible with the Biesemeyer BC50, BHS40 and BHS52 saw fence systems. This blade guard can perform non-through cutting operations without needing to be removed. And because of its overhead design, there is no mounting bracket behind the blade to interfere with molding operations or dado cutting. Features include a U-shaped support arm that allows users to cut to the full capacity of the fence and a separate, removable splitter for use during through-cutting. Also included is a see-through blade guard that allows for any blade angle. This same blade guard is counter balanced to permit perfect weight adjustments. This blade guard system includes a T-arm assembly, a blade guard, a splitter, an installation bracket, and mounting hardware…. More >>

Biesemeyer 78-960 T-Square Table Saw BladeGuard System for 50-Inch and 52-Inch Fences

• compatible with the 2-Inchx3-Inch front rail systems on most commercial table saws.
• all parts of the fence are replaceable in the event of wear or accidental damage
• hold-downs and shop-built jigs can be quickly attached to the fence
• hairline adjustable cursor allows you to position the fence in relation to the thickness of different saw blades for a precise cut
• without removing the fence from the saw table, you can quickly align the hairline cursor with the scale to ensure the fence is parallel to the saw

Exaktor EX100/80 Table Saw Fence System with 80-Inch Front and Rear Guide Rails

• 35-Inch wide, open grid powder-coated table. 96-Inch long outboard rail, will crosscut up to 62-Inch if the fence is positioned at the rear Legs adjustable to 35-Inch in height
• 30-Inch telescopic extension from the left end of the crosscut fence will support pieces up to 96-Inch, other extension from the front of the sliding table allows you to crosscut panels up to 62-Inch wide
• 65-Inch crosscut fence included and can be positioned at the front or the rear of the table
• shipped complete with quick-release bracket, hold-down clamp, two work stops, two table extensions, and panel supports
• Legs adjustable to 35-Inch in height

Product Description
An Exaktor Sliding Table is a definite asset to your woodworking shop. Available in three sizes and designed to fit most table saws, our sliding tables make it easy and safe for one person to cut large, heavy panels or long stock…. More >>

Exaktor EX60 Table Saw Open Grid Sliding System with Guide Rails, Fence, Table Assembly, Extension Bars and Blocks